Send document comments to nexus7k-docfeedback@cisco.com
3-14
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-18634-01
Chapter 3 Installing a Cisco Nexus 7018 Chassis
Installing the Cable Management Assemblies
Figure 3-7 ESD Grounding Ports on the Front of the Cisco Nexus 7018 Chassis
Installing the Cable Management Assemblies
After you have fully installed the Cisco Nexus 7018 device chassis in the rack or cabinet (see the
“Installing the Chassis” section on page 3-6), you can install the cable management assemblies on the
front of the chassis.
To install the cable management assemblies on the Cisco Nexus 7018 device chassis, follow these steps:
Step 1 Attach a lower cable management assembly (800-31343-01) onto the two hooks tha t protrude from the
lower half of the left rack-mount bracket that is attached to th e Cisco Nexus 7018 device chassis, and
loosely fasten the assembly to the chassis with four flat-head M4x1 0 screws as shown in Figure 3-8.
192098
1
1ESD port