Send document comments to nexus7k-docfeedback@cisco.com
3-23
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-18634-01
Chapter 3 Installing a Cisco Nexus 7018 Chassis
Installing the Front Door and Air Intake Frame
Figure 3-16 Attaching the Hinge Bracket to the Cable Management Assemblies and Chassis
Step 5 Tighten the four M4x8 screws that fasten the hinge bracket to the chassis to 11 to 15 in. lbs.
Step 6 Tighten the four M4x8 screws that fasten the hinge bracket to the cable management assemblies to 11 to
15 in.lbs.
Step 7 Fasten the four ball-point studs (51-5008-01), each one with a washer (49-0430-01), to the bottom
portion of the chassis, one stud by each corner of the air intake area as shown in Figure 3-17.
192229
1
1
2 2
1Four M4x8 pan-head screws that fasten the
hood to the chassis.
2Four M4x8 pan-head screws that fasten the
hood to the left and right cable management
assemblies.