Prepare for Installation
Note: For detailed hardware installation instructions and safety guidelines, refer to the Cisco 7100 Series VPN Router Installation and Configuration Guide.
| Warning Only trained and qualified personnel should install, replace, or service this |
| equipment. |
| Warning Read the Installation instructions before you connect the system to its |
| power source. |
| Warning This unit is intended for installation in restricted access areas. A restricted |
| access area is where access can only be gained by service personnel through the use of |
| a special tool, lock and key, or other means of security, and is controlled by the |
| authority responsible for the location. |
1 | Ensure the site is set up properly and ensure your safety when installing the router: |
| — Lift the router safely out of the packing container. |
| — Ensure the power service at the site is suitable for the router you are installing. |
2 | Check the packing slip to ensure that all the proper components are present. |
3 | Verify that you have the required tools and parts: |
| — 19- and |
| — Four screws for installing the router in the rack (not included). |
| — One double ground lug and two |
| — Number 2 Phillips screwdriver (not included). |
| — Appropriate cables to connect the router to the network and console terminal. |
| — Power cord (two power cords if dual power supply). |
| — |
1
