57
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
OL-10362-06
Supported Hardware
Application Control Engine (ACE) Module Service Application Module for IP
WS-SVC-NAM-1 2.89 A@42 V Network Analysis Module 1; CEF256
With Supervisor Engine 720 12.2(33)SRA
With Supervisor Engine 32 12.2(33)SRA
With Route Switching Processor 720-1GE 12.2(33)SRC
Note
•WS-SVC-NAM-2 and WS-SVC-NAM-1 run their own software—See this publication for more information:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_15353.htm
•WS-SVC-NAM-2 and WS-SVC-NAM-1 have been tested with OSM-2+4GE-WAN+ and the OC-12 Packet-over-SONET
OSMs.
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
ACE10-6500-K9 5.23 A@42 V Application Control Engine (ACE) module
With Supervisor Engine 720 12.2(33)SRB
With Route Switching Processor 720-1GE 12.2(33)SRC
ACE20-SBC-K9 5.23 A@42 V Cisco 7600 Series ACE 20 HW for Session Border Controller
With Supervisor Engine 720 12.2(33)SRB1
With Route Switching Processor 720-1GE 12.2(33)SRC
•ACE10-6500-K9 runs its own software—See these publications:
•http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/mod_icn/ace/index.htm
•See the ACE10-6500-K9 software release notes for information about the minimum required ACE10-6500-K9 software
version.
Note
•Cisco IOS Software modularity does not support ACE10-6500-K9.
•Supervisor Engine 32 does not support ACE10-6500-K9.
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
WS-SVC-SAMI-BB 7.14 A@42 V Cisco Service and Application Module IP
With Supervisor Engine 720-3BXL 12.2(33)SRB
With Supervisor Engine 32 12.2(33)SRC
With Route Switching Processor 720-1GE 12.2(33)SRC
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version