22
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
OL-10362-06
Supported Hardware
Gigabit Ethernet Switching Modules
Product ID
(append “=” for spares)
Power
Required Product Description
Minimum
Software Version
WS-X6748-SFP 5.32 A@42 V 48-port Gigabit Ethernet SFP
•CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)
•dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)
•dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)
•Supports egress multicast replication
•QoS architecture:
–
With DFC3: 2q8t/1p3q8t
–
With CFC : 1q8t/1p3q8t
•Number of ports: 48
Number of port groups: 4
Port ranges per port group:
1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23
2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47
26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46, 48
Supported only with Supervisor Engine 720 12.2(33)SRA
Note
•WS-X6748-SFP requires one of the following:
–
WS-F6700-DFC3BXL (3.30A@42V)
–
WS-F6700-DFC3B (3.00 A@42 V)
–
WS-X6700-CFC (0.75 A@42 V)
•WS-X6748-SFP ships with WS-X6700-CFC installed unless ordered with WS-F6700-DFC3BXL or WS-F6700-DFC3B.
•WS-X6748-SFP is supported in the WS-C6503-E chassis.
•WS-X6748-SFP is not supported in the WS-C6503 and CISCO7603 chassis.
•In a 13-slot chassis, WS-X6748-SFP is supported only in slots 9 through 13 and does not power up in other s lots.
•On WS-X6748-SFP ports, STP BPDUs are not exempt from Traffic Storm Co ntrol suppression. Do not configure Traffic
Storm Control on STP-pr otected WS-X6748-SFP ports that interconnect network devices.
•See the “Small Form-Factor Pluggable Modules (SFPs)” section on page 26.