Cisco Systems 7600 SERIES manual Distributed Forwarding Card 3B, WS-F6700-DFC3B

Supported Hardware

Distributed Forwarding Card 3B

•WS-F6700-DFC3B, page 16

•WS-F6K-DFC3B, page 16

WS-F6700-DFC3B

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
WS-F6700-DFC3B	3.00 A@42 V	Distributed Forwarding Card 3B (DFC3B) for use on CEF720 modules
		Supported only with Supervisor Engine 720	12.2(33)SRA
Note

•WS-F6700-DFC3B uses memory that is installed on the switching module.

•Refer to this publication for information about WS-F6700-DFC3B upgrades: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_15893.htm

WS-F6K-DFC3B

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
WS-F6K-DFC3B	1.67 A@42 V	Distributed Forwarding Card 3B (DFC3B) for use on dCEF256 and CEF256
		modules
		Supported only with Supervisor Engine 720	12.2(33)SRA
Note

•Refer to this publication for information about WS-F6K-DFC3B memory upgrades: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/cfgnotes/78_12409.htm

•Supervisor Engine 720 supports a WS-F6K-DFC3B on these WS-X6516-GBICswitching module hardware revisions:

–Lower than 5.0

–5.5 and higher

•Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBICswitching module hardware revisions 5.0 through 5.4. With a Supervisor Engine 720 and with a DFC3 installed, WS-X6516-GBICswitching module hardware revisions 5.0 through 5.4 do not power up.

•With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBICswitching module hardware revisions 5.0 through 5.4 operate in bus mode.

•Refer to external field notice 24494 for more information about Supervisor Engine 720 and a DFC3 on WS-X6516-GBICswitching modules:

http://www.cisco.com/warp/public/770/fn24494.shtml

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

16 OL-10362-06