Cisco Systems 7600 SERIES manual WS-F6700-DFC3C, X2-10GB-CX4, X2-10GB-LX4, X2-10GB-ER

Supported Hardware

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
WS-X6502-10GE	3.30 A@42 V	1-port 10-Gigabit Ethernet

•With Supervisor Engine 720:

–dCEF256 with WS-F6K-DFC3BXL(adds 1.47 A@42 V)

–dCEF256 with WS-F6K-DFC3B(adds 1.67 A@42 V)

•QoS port architecture (Rx/Tx): 1p1q8t/1p2q1t

•Number of ports: 1

Number of port groups: 1

Port ranges per port group: 1 port in 1 group

			With Supervisor Engine 720	12.2(33)SRA
			With Supervisor Engine 32	12.2(33)SRA
Note WS-X6502-10GE does not support Inter-Switch Link (ISL) encapsulation.
Optical Interface Module (OIM) for WS-X6502-10GE
WS-G6488		10GBASE-LR serial 1310 nm long-reach OIM		12.2(33)SRA
WS-G6483		10GBASE-ER serial 1550 nm extended-reach OIM		12.2(33)SRA
Product ID	Power			Minimum
(append “=” for spares)	Required		Product Description	Software Version
WS-X6708-10G-3C	10.58A @42 V		8-port 10-Gigabit Ethernet X2module
(WS-X6708-10GE with			• dCEF720
WS-F6700-DFC3C)
			• Supports egress multicast replication
WS-X6708-10G-3CXL	11.28A @ 42V
(WS-X6708-10GE with			• QoS port architecture (Rx/Tx): 8q4t/1p7q4t
WS-F6700-DFC3CXL)			• Dual switch-fabric connections
			Fabric Channel #1: Ports 2, 3, 6, 8
			Fabric Channel #2: Ports 1, 4, 5, 7
			• Number of ports: 8
			Number of port groups: 8
			Port ranges per port group: 1 port in each group
			Supported only with Supervisor Engine 720, Route Switch	12.2(33)SRC
			Processor 720, and RSP720-10GE.
			X2 Modules Supported in Gigabit Ethernet SPAs
			X2-10GB-SR	12.2(33)SRC
			X2-10GB-CX4	12.2(33)SRC
			X2-10GB-LX4	12.2(33)SRC
			X2-10GB-ER	12.2(33)SRC

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

OL-10362-06 19