Cisco Systems 7600 SERIES manual Route Switching Processor, RSP 720 Common Features

Supported Hardware

•These service modules:

–WS-SVC-AON-1-K9—Application-Oriented Networking Module

–WS-SVC-AGM-1-K9—Anomaly Guard Module

–WS-SVC-ADM-1-K9—Traffic Anomaly Detector Module

–WS-SVC-MWAM-1—Multi-Processor WAN Application Module

•Supervisor Engine 32 does not support these software features and commands:

–Protocol independent multicast (PIM) snooping designated-router flooding configurability

–NetFlow version 9

–Egress multicast replication

–Multicast replication mode detection

–All fabric configuration commands

Product ID	Power				Minimum
(append “=” for spares)	Required	Product Description			Software Version
WS-SUP32-10GE-3B	2.39 A@42 V	Supervisor Engine 32:			12.2(33)SRA
WS-SUP32-GE-3B	1.89 A@42 V	• One 10/100/1000 Mbps RJ-45 port
		• WS-SUP32-10GE—two Gigabit Ethernet ports
			(requires XENPAKs)
		• WS-SUP32-GE—eight Gigabit Ethernet SFP ports (requires
			Gigabit Ethernet SFPs)
		•	512-MB DRAM
		•	256-MB bootflash
		• Policy Feature Card 3B (PFC3B); see the
			“RSP720-3C-10GE” section on page 10
		• Multilayer Switch Feature Card 2A (MSFC2A):
			–	512-MB DRAM
			–	64-MB bootflash

Note See this publication for Supervisor Engine 32 hardware information: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/6000hw/supe_gd/index.htm

Route Switching Processor 720

RSP 720 Common Features

•Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps small form pluggable (SFP) module; port 2 is configurable with either a 1-Gbps SFP module or a 10/100/1000-Mbps RJ-45

•Integrated 720-Gbps switch fabric

•Two CompactFlash Type II slots (on front panel) and 2-GB internal CompactFlash (1 GB each for RP and SP)

•Requires larger power supplies and a high-speed fan tray

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

OL-10362-06 7