Cisco Systems 7600 SERIES manual XENPAKs, X2-10GB-LR 12.233SRC, CISCO7604, Product ID Minimum

Models: 7600 SERIES

1 74
Download 74 pages 38.06 Kb
Page 20
Image 20

Supported Hardware

Product ID

Power

 

Minimum

(append “=” for spares)

Required

Product Description

Software Version

 

 

 

 

 

 

X2-10GB-LR

12.2(33)SRC

 

 

 

 

Note

 

 

 

To configure WS-X6708-10GE port oversubscription, refer to the hw-module oversubscription command in the command reference at this URL:

http://www.cisco.com/en/US/products/ps6922/prod_command_reference_list.html

Installation of a WS-X6708-10GE switching module in a chassis other than the following prevents operation at levels that are fully NEBS-compliant:

WS-C6503-E

WS-C6504-E

WS-C6506-E

WS-C6509-E

WS-C6509-NEB-Awith dual fan tray

CISCO7604

CISCO7609 with dual fan tray

WS-X6708-10G-3C and WS-X6708-10G-3CXL are the orderable product IDs.

The front panel is labeled WS-X6708-10GE.

Cisco IOS software commands display WS-X6708-10GE with either WS-F6700-DFC3C or WS-F6700-DFC3CXL.

WS-X6708-10GE ports do not support VACL capture. (CSCsb59015)

WS-X6708-10GE is not supported in the WS-C6503and CISCO7603 chassis.

In a 13-slot chassis, WS-X6708-10GE is supported only in slots 9 through 13 and does not power up in other slots.

On WS-X6708-10GE ports, STP BPDUs are not exempt from Traffic Storm Control suppression. Do not configure Traffic Storm Control on STP-protected WS-X6708-10GE ports that interconnect network devices.

XENPAKs

Product ID

 

Minimum

(append “=” for spares)

Product Description

Software Version

 

 

 

DWDM-XENPAK

10GBASE dense wavelength division multiplexing (DWDM) 100-GHz ITU grid

12.2(33)SRA

 

 

 

WDM-XENPAK-REC

10GBASE receive-only wavelength division multiplexing (WDM)

12.2(33)SRA

 

 

 

XENPAK-10GB-CX4

10GBASE for CX4 cable

12.2(33)SRA

 

 

 

XENPAK-10GB-SR

10GBASE-SR Serial 850-nm short-reach multimode fiber (MMF)

12.2(33)SRA

 

 

 

XENPAK-10GB-LX4

10GBASE-LX4 Serial 1310-nm multimode fiber (MMF)

12.2(33)SRA

 

 

 

XENPAK-10GB-ER

10GBASE-ER Serial 1550-nm extended-reach, single-mode fiber (SMF),

12.2(33)SRA

 

dispersion-shifted fiber (DSF)

 

 

 

 

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

20

OL-10362-06

 

 

Page 20
Image 20
Cisco Systems 7600 SERIES manual XENPAKs, X2-10GB-LR 12.233SRC, WS-C6503-E WS-C6504-E WS-C6506-E WS-C6509-E, CISCO7604