Cisco Systems 7600 SERIES manual Circuit Emulation over Packet CEoP SPAs, Services SPA Carrier SSC

Supported Hardware

Circuit Emulation over Packet (CEoP) SPAs

Product ID			Minimum
(append “=” for spares)	SIP Support	Product Description	Software Version
SPA-2CHT3-CE-ATM	7600-SIP-400	2-Port Channelized T3/E3 ATM CEoP SPA	12.2(33)SRC

Note The SPA-2CHT3-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel.

SPA-1CHOC3-CE-ATM	7600-SIP-400	1-Port Channelized OC-3 STM1 ATM CEoP SPA	12.2(33)SRB
		SFP Modules Supported in SPA-1XCHOC3-CE
		SFP-OC3-MM	12.2(33)SRB
		SFP-OC3-IR1	12.2(33)SRB
		SFP-OC3-LR1	12.2(33)SRB
		SFP-OC3-LR2	12.2(33)SRB
		SFP-OC3-SR	12.2(33)SRB
SPA-24CHT1-CE-ATM	7600-SIP-400	24-Port Channelized T1/E1/J1 ATM CEoP SPA	12.2(33)SRB

Note The SPA-24CHT1-CE-ATM does not use SFPs, use a Telco connector with a Y cable to connect to a patch panel.

Services SPA Carrier (SSC)

Product ID	Power		Minimum
(append “=” for spares)	Required	Product Description	Software Version
7600-SSC-400	5.43 A@42 V	Services SPA Carrier (SSC)	12.2(33)SRA
Note

•7600-SSC-400 does not maintain state when an NSF with SSO redundancy mode switchover occurs.

•Supervisor Engine 720 and Supervisor Engine 32 support the 7600-SSC-400 beginning with Cisco IOS Release 12.2(33)SRA .

•Route Switching Processor 720-1GE supports the 7600-SSC-400 beginning with Cisco IOS Release 12.2(33)SRC .

Services SPAs

Product ID			Minimum
(append “=” for spares)	Carrier	Product Description	Software Version
IPSEC-SPA-2G	7600-SSC-400	IPSec SPA	12.2(33)SRA

Note The IPSEC-SPA-2G supports the Route Switching Processor 720 beginning with Cisco IOS Release 12.2(33)SRC.

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR

48 OL-10362-06