CONFIGURING the SERVER
STEP 4 SELECT RAID CONFIGURATION
NOTE: If you do not select a mezzanine card, a PCIe RAID controller, or one of the embedded RAID upgrade options, you will have an embedded
NOTE: When creating a RAID volume, follow these guidelines:
■Use the same capacity for each drive in the volume
■Use either all SAS drives or all SATA drives
■Use either all HDDs or all SSDs
NOTE: The number of RAID groups (virtual drives) supported per controller is as follows:
■Embedded RAID = 8
■LSI MegaRAID
■LSI MegaRAID
■Cisco UCSC RAID SAS
The RAID controller choices are:
(1) Embedded RAID (on motherboard)
NOTE: The RAID configuration options listed in Table 8 on page 24 are not available if you choose embedded RAID (in this case, you must configure RAID yourself using separate software).
(2)Mezzanine RAID controller cards (not supported in
(3)PCIe RAID controllers
Cisco can provide
22 | Cisco UCS Cisco UCS C220 M3 |