BASE SERVER STANDARD CAPABILITIES and FEATURES
Capability/Feature | Description |
|
|
Interfaces | ■ Rear panel |
| • One RJ45 serial port connector |
| • Two USB 2.0 port connectors |
| • One DB15 VGA connector |
| • Two |
| • One |
| Integrated Management Controller (CIMC) firmware |
| ■ Various PCIe card ports (dependent on which cards are installed) |
| • Converged Network Adapter (CNA) ports |
| • Network Interface Card (NIC) ports |
| • Host Bus Adapter (HBA) ports |
| ■ Front panel |
| • One KVM console connector (supplies two USB, one VGA, and one |
| serial connector) |
WoL | The |
| standard. |
InfiniBand | The bus slots in this server support the InfiniBand architecture. |
Front Panel | A front panel controller provides status indications and control buttons |
Power subsystem | Up to two 450 W (AC) , 650 W, (AC), or 930 W (DC) power supplies. One is |
| mandatory; one more can be added for 1 + 1 redundancy. |
ACPI
Fans
Integrated management processor
This server supports the advanced configuration and power interface (ACPI) 4.0 standard.
Chassis:
■Five
■Each power supply is equipped with a fan.
BMC running Cisco Integrated Management Controller (CIMC) firmware.
Depending on your CIMC settings, the CIMC can be accessed through the
10 | Cisco UCS Cisco UCS C220 M3 |