| CONFIGURING the SERVER | ||
|
|
| |
Table 8 Available PCIe RAID Controller Options (continued) | |||
|
|
| |
Product ID (PID) | PID Description | ||
|
|
| |
LSI MegaRAID SAS | |||
■ Supports from one to eight external SAS ports (up to 240 external drives). | |||
|
|
| |
| NOTE: For SAS | ||
| support, see the compatibility list (enclosure section) at the following | ||
| link: | ||
| http://tinyurl.com/b4etshk | ||
| Cisco is able to support customers with questions related to the SAS | ||
| |||
| their storage vendor for technical support related to enclosure/JBOD. | ||
|
|
| |
| ■ Includes an | ||
| 1 GB | ||
| ■ | ||
| Configuration section in this table). Note that factory RAID configuration is | ||
| not available for these controllers, because the factory does not control | ||
| the storage array attached to them. | ||
|
|
|
|
Super Capacitor Option |
|
|
|
|
|
| |
LSI CacheVault Power Module. This is a spare supercapacitor. It is the exact | |||
| same supercapacitor that ships with the | ||
| cards listed earlier in this table and can be used as a replacement or upgrade | ||
| part. | ||
RAID Configuration Options (not available for embedded RAID)
Enable Single Disk Raid 0 Setting (for the following PIDs only): | |
| ■ |
| ■ |
| ■ |
Factory preconfigured RAID striping option | |
| Enable RAID 0 Setting. Requires a minimum of one hard drive. |
Factory preconfigured RAID mirroring option | |
| Enable RAID 1 Setting. Requires exactly two drives with the same size, speed, |
| capacity. |
Factory preconfigured RAID option | |
| Enable RAID 5 Setting. Requires a minimum of three drives of the same size, |
| speed, capacity. |
Factory preconfigured RAID option | |
| Enable RAID 6 Setting. Requires a minimum of four drives of the same size, |
| speed, capacity. |
Factory preconfigured RAID option | |
| Enable RAID 10 Setting. Requires a even number of drives (minimum of four |
| drives) of the same size, speed, capacity. |
|
|
Cisco UCS Cisco UCS C220 M3 | 25 |
