Cisco Systems A03D600GA2 manual Racks

SUPPLEMENTAL MATERIAL

RACKS

The Cisco R42610 rack (see Figure 10) is certified for Cisco UCS installation at customer sites and is suitable for the following equipment:

■Cisco UCS B-Series servers and fabric interconnects

■Cisco UCS C-Series and select Nexus switches

The rack is compatible with hardware designed for EIA-standard 19-inch racks. Rack specifications are listed in Table 37.

Table 37 Cisco R42610 Rack Specifications

Parameter	Standard Rack	Expansion Rack
Dimensions (H x W x D)	78.74 x 24 x 43.38 in.	78.74 x 23.58 x 43.38 in.
	(2000 x 610 x 1102 mm)	(2000 x 599 x 1102 mm)
Dimensions (H x W x D)	89 x 33 x 47 in.	89 x 33 x 47 in.
with packaging	(2261 x 838 x 1194 mm)	(2261 x 838 x 1194 mm)
Distance from front	29.2 in (741 mm)	29.2 in (741 mm)
mounting rail to rear
mounting rail
Weight	299.83 lb (136 kg)	231. 49 lb (105 kg)
Weight with packaging	354 lb	284 lb
	(161 kg)	(129 kg)
Side panels included	Yes	No
Equipment mounting	42RU	42RU
capacity
Static load capacity	2100 lb	2100 lb
	(954 kg)	(954 kg)
Dynamic load capacity	Not applicable	Not applicable

NOTE: The AC input connector is an IEC 320 C-14 15 A/250 VAC power inlet.

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model) 71