Manuals / Cisco Systems / Computer Equipment / Computer Drive

Cisco Systems A03D600GA2 Select DIMMs and Memory Mirroring, Available DDR3 DIMMs, Product ID PID

Models: A03D600GA2

1 80

Download 80 pages 48.27 Kb

Page 17

Select DIMMs and Memory Mirroring

CONFIGURING the SERVER

Select DIMMs and Memory Mirroring

Select the memory configuration and whether or not you want the memory mirroring option. The available memory DIMMs and mirroring option are listed in Table 4.

NOTE: When memory mirroring is enabled, the memory subsystem simultaneously writes identical data to two channels. If a memory read from one of the channels returns incorrect data due to an uncorrectable memory error, the system automatically retrieves the data from the other channel. A transient or soft error in one channel does not affect the mirrored data, and operation continues unless there is a simultaneous error in exactly the same location on a DIMM and its mirrored DIMM. Memory mirroring reduces the amount of memory available to the operating system by 50% because only one of the two populated channels provides data.

Table 4 Available DDR3 DIMMs

	Product ID (PID)	PID Description		Voltage	Ranks
	Product ID (PID)	PID Description		Voltage	/DIMM
					/DIMM

	DIMM Options1
	UCS-ML-1X324RY-A	32 GB DDR3-1600-MHz LR DIMM/PC3-12800/4R/x4/1.35v		1.5/1.35 V2	4
	UCS-MR-1X162RY-A	16 GB DDR3-1600-MHz RDIMM/PC3-12800/2R/x4/1.35v		1.5/1.35 V2	2
	UCS-MR-1X162RZ-A	16 GB DDR3-1866-MHz RDIMM PC3-14900/2R/x4/		1.5 V	2
	UCS-MR-1X082RY-A	8	GB DDR3-1600-MHz RDIMM/PC3-12800/2R/x4/1.35v	1.5/1.35 V2	2
	UCS-MR-1X082RX-A3	8	GB DDR3-1333-MHz RDIMM/PC3-10600/2R/x4/1.35v	1.5/1.35 V2	2
	UCS-MR-1X082RZ-A	8	GB DDR3-1866-MHz RDIMM/PC3-14900/2R/x4/	1.5 V	2
	UCS-MR-1X041RY-A	4	GB DDR3-1600-MHz RDIMM/PC3-12800/1R/x4/1.35v	1.5/1.35 V2	1
	UCS-MR-1X041RX-A3	4	GB DDR3-1333-MHz RDIMM/PC3-10600/1R/x4/1.35v	1.35 V	1
	UCS-MU-1X042RE-A3	4	GB DDR3-1600-MHz ECC UDIMM/PC3-12800/2R/x8/1.35v	1.35 V	2
	Memory Mirroring Option
	N01-MMIRROR	Memory mirroring option

Notes . . .

1.1866-MHz DIMMs cannot be used with Intel Xeon E5-2600 CPUs

2.Dual voltage DIMM (operates at 1.5 V with BIOS is set for memory performance mode (default), or 1.35 V when BIOS is set for power-savings mode).

3.No longer shipping as of November, 2013

Cisco UCS Cisco UCS C220 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)

17

Image 17

Cisco Systems A03D600GA2 Select DIMMs and Memory Mirroring, Available DDR3 DIMMs, Product ID PID, PID Description, Voltage

Contents

Cisco UCS C220 M3 High-Density Rack Server Small Form Factor Disk Spec SheetDrive Model CISCO SYSTEMSTECHNICAL SPECIFICATIONS Compliance Requirements CONTENTSPower Specifications Environmental Specifications Page Rear View OVERVIEWFigure 1 Cisco UCS C220 M3 High-Density SFF Rack Server Front View Chassis Front View DETAILED VIEWSHDD1 HDD2PCIe2 Chassis Rear ViewPCIe1 Figure 3 Chassis Rear ViewTable 1 Capabilities and Features BASE SERVER STANDARD CAPABILITIES and FEATURESCapability/Feature DescriptionDescription Capability/FeatureBASE SERVER STANDARD CAPABILITIES and FEATURES Description Capability/FeatureCONFIGURING the SERVER Table 2 PID of the C220 M3 High-Density SFF Rack Base Server STEP 1 VERIFY SERVER SKUProduct ID PID DescriptionPower STEP 2 SELECT CPUsSelect CPUs HighestHighest PowerIntel ClockCaveats Approved Configurations 1 1-CPU configurations2 2-CPU Configurations Figure 4 C220 M3 SFF Memory Organization STEP 3 SELECT MEMORYTable 4 Available DDR3 DIMMs Select DIMMs and Memory MirroringProduct ID PID PID Description1 1-CPU configuration without memory mirroring Approved Configurations2 1-CPU configuration with memory mirroring CPU 1 DIMM Placement in ChannelsCPU 1 DIMM Placement in Channels 4 2-CPU configuration with memory mirroringCPU 2 DIMM Placement in Channels NumberDo not mix RDIMMs, LRDIMMs, or UDIMMs CaveatsTable 5 DIMM Memory Speeds CPU choice DIMM choice 3 PCIe RAID controllers STEP 4 SELECT RAID CONFIGURATION1 Embedded RAID on motherboard Table 6 Available Embedded RAID Options Select RAID OptionsProduct ID PID PID DescriptionProduct ID PID Table 7 Available Mezzanine Card RAID Options continuedPID Description Table 8 Available PCIe RAID Controller OptionsTable 8 Available PCIe RAID Controller Options continued RAID Configuration Options not available for embedded RAIDProduct ID PID PID DescriptionThe C220 M3 SFF server has an 8-drive backplane Approved ConfigurationsEnabled Table 9 Supported RAID ConfigurationsInstalled defaultCaveats Note that only a single Cisco VIC card the half-height Cisco VIC 1225 PCIe card is supported and it must be installed in the full-height PCIe slot slot 1 on riser 1. So take this into account when populating RAID controller cardsSelect Drives STEP 5 SELECT HARD DISK DRIVES HDDs or SOLID STATE DRIVES SSDsTable 10 Available Hot-Pluggable Sled-Mounted HDDs and SSDs Product ID PIDCaveats Approved Configurations1 Onboard RAID, Mezzanine Cards, and all PCIe RAID Controllers Select PCIe Option Cards STEP 6 SELECT PCIe OPTION CARDsTable 11 Available PCIe Option Cards Product ID PIDTable 11 Available PCIe Option Cards continued Approved Configurations 1 No PCIe RAID controllerProduct ID PID PID DescriptionOther considerations for the Cisco VIC Approved Configurations STEP 7 ORDER OPTIONAL NETWORK CARD ACCESSORIESChoose Optional Twinax Cables Table 12 Available Twinax CablesYou may choose one or two SFP+ optical modules cables for each compatible PCIe network card ordered. You would normally order two modules for connecting to the primary and redundant network switching equipment. With the SFP+ optical modules, you can use common fiber optic cables, widely available Approved Configurations1 Choose Up to Two SFP+ Modules for Each Network Card Ordered CaveatsPCIe Cards Table 14 PCIe Card CompatibilityTwinax Cisco SFP ModulesFigure 5 Network Card Connections CONFIGURING the SERVERhttps//express.salire.com/Go/Cisco/Cisco-UCS-Power-Calculator.aspx STEP 8 ORDER POWER SUPPLYPower Supply PIDs Product ID PIDTable 16 Available Power Cords STEP 9 SELECT AC POWER CORDsProduct ID PID PID DescriptionProduct ID PID Table 16 Available Power CordsPID Description ImagesProduct ID PID Table 16 Available Power CordsPID Description CAB-9K10A-ITCable Management Arm STEP 10 ORDER OPTIONAL REVERSIBLE CABLE MANAGEMENT ARMProduct ID PID PID DescriptionTable 18 Trusted Platform Module STEP 11 ORDER A TRUSTED PLATFORM MODULE OPTIONALProduct ID PID PID DescriptionSecure Digital SD Card preloaded with software STEP 12 ORDER CISCO FLEXIBLE FLASH SD CARD MODULE OPTIONALProduct ID PID PID DescriptionCONFIGURING the SERVER STEP 13 ORDER OPTIONAL USB 2.0 DRIVEUSB 2.0 Drive Product ID PIDTable 22 OSs and Value-Added Software for 2-CPU servers STEP 14 SELECT OPERATING SYSTEM AND VALUE-ADDED SOFTWAREPID Description Product ID PIDPID Description Table 22 OSs and Value-Added Software for 2-CPU servers continuedProduct ID PID Red Hat Enterprise LinuxPID Description Table 22 OSs and Value-Added Software for 2-CPU servers continuedProduct ID PID VMwareOS Media STEP 15 SELECT OPERATING SYSTEM MEDIA KITProduct ID PID PID DescriptionUnified Computing Warranty, No Contract STEP 16 SELECT SERVICE and SUPPORT LEVELCisco SMARTnet for UCS Service SMARTnet for UCSSMARTnet for UCS Hardware Only Service SMARTnet for UCS Hardware Only ServiceService Unified Computing Partner Support ServiceService Partner Support Service for UCSTable 27 Partner Support Service for UCS Hardware Only ServiceCON-NCF2- C220M3SF NCF2 Service Description Table 29 Drive Retention Service OptionsService ServiceRacks and Rack Options OPTIONAL STEP - ORDER RACKsProduct ID PID PID DescriptionPDU Options OPTIONAL STEP - ORDER PDUProduct ID PID PID DescriptionFigure 6 C220 M3 SFF With Top Cover Off SUPPLEMENTAL MATERIALCHASSIS Physical Layout CPUs and DIMMsCPU2 CPU1Figure 7 Physical Layout of CPU DIMM Channels and Banks ServerTable 32 DIMM Rules for C220 M3 Servers Memory Population RulesDIMM Parameter DIMMs in the Same ChannelDIMM Population Order per CPU DIMM Population OrderDIMMs PopulateRecommended Memory Configurations1 Recommended Memory ConfigurationCPU 1 DIMMs CPU 2 DIMMsTable 35 Supported DIMM Configurations Supported DIMM PopulationsTotal DIMMs Total DIMMsLow-Voltage DIMM Considerations 2 2-CPU Configurations Select one of the following RAID Details1 1-CPU Configurations Figure 8 Example BIOS Screen for OPROM RAID Option ROM OPROM SettingsSerial Port RJ-45 Female Connector Serial Port DetailsFigure 9 Serial Port Female RJ-45 Connector Pinout Pin Signal 1 RTS Request to Send 2 DTR Data Terminal ReadyDescription Upgrade and Servicing-Related PartsSpare Product ID PID CPU Removal and Installation “pick n place” Tool Set Motherboard Lithium BatteryDrive Blanking Panels Adding an Additional CPU with CPU heat sinkThermal Grease with syringe applicator for CPU to Heatsink Seal Air Baffle Replacement KitCPU Heat Sink Cleaning Kit Table 37 Cisco R42610 Rack Specifications RACKSParameter Standard RackFront view - door closed Figure 10 Cisco R42610 RackFront view - door removed Front view - door openFigure 11 Zero Rack Unit PDU PID = RP208-30-2P-U-2 PDUsKVM Cable KVM CABLEProduct ID PID PID DescriptionUSB connector Motherboard USB and SD Ports, and RAID Card Backup LocationSD1 socket SD2 socketDimensions and Weight TECHNICAL SPECIFICATIONSPower Specifications Table 39 UCS C220 M3 Dimensions and WeightSpecification Table 40 UCS C220 M3 SFF 450 W Power Supply Specifications continuedTable 41 UCS C220 M3 SFF 650 W AC Power Supply Specifications SpecificationSpecification Table 42 UCS C240 M3 SFF Power Specifications 930 W DC power supplyhttps//express.salire.com/Go/Cisco/Cisco-UCS-Power-Calculator.aspx DescriptionTable 43 UCS C220 M3 Environmental Specifications Environmental SpecificationsParameter MinimumTable 44 UCS C-Series Regulatory Compliance Requirements Compliance RequirementsParameter Description