Examples of ATM Error Messages
Error Message
atm_pakalign(ATM2/0): Invalid VC(65535) received, type=0xaaaa
Explanation A packet was received by the ACIP with a VC that is out of the valid range of VCs.
Error Message
atm_pakalign(ATM2/0): VC(1) NOT configured, type=0xaaaa
Explanation A packet was received by the ACIP for which a VC is not configured.
Error Message
ATM(ATM2/0): Encapsulation error, link=0xaaaa, host=0xaaaa
Explanation The ATM software failed to encapsulate a protocol because the protocol/address are not in a STATIC map table.
Error Message
ATM(ATM2/0: Encapsulation error, VC=1 not connected
Explanation A static map exists for the protocol address, but the VC has not been configured.
Error Message
ATM(ATM2/0): VC(1) Bad SAP received
Explanation A packet with a bad SNAP encapsulation was received.
Error Message
ATM(ATM2/0): Bad VC(1) encapsulation configured
Explanation An internal error has occurred. Check the VC encapsulation.
ATM Cable Interface Processor (ACIP) Installation and Configuration 31
