Connect to the Router | Cisco Systems Cisco 815 manual

Warning

Warning

Warning

Caution

Caution

Caution

Caution

Caution

Before working on a system that has an on/off switch, turn OFF the power and unplug the power cord. Statement 1

Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040

To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of 40 deg. Statement 1047

To prevent damage to the chassis, never attempt to lift of tilt the chassis by the plastic panel on the front. Always hold the chassis by the metal body.

To prevent damage to the chassis, never attempt to lift or tilt the chassis by the plastic panel on the front. Always hold the chassis by the metal body.

Your chassis installation must allow unrestricted airflow for chassis cooling. For placing the router on a desktop, keep at least 1 inch (2.54 cm) of clear space beside the cooling inlet and exhaust vents.

Do not place any items that weigh more than 10 pounds (4.5 kilograms) on top of the chassis, and do not stack routers on a desktop.

There are no field-replaceable parts inside the router. Do not open the router enclosure to replace parts.

6Connect to the Router

This section describes the procedures for cable connections.

15

Image 15

Cisco Systems Cisco 815 quick start Connect to the Router, This section describes the procedures for cable connections

Contents

Including License and Warranty Cisco 90-Day Limited Hardware Warranty Terms Duration of Hardware WarrantyReplacement, Repair, or Refund Policy for Hardware Product Serial Number Location To Receive a Return Materials Authorization RMA NumberCisco Product Accessibility Overview Software Features Hardware Features Documents, Equipment, and Tools Items Included with the Cisco 815 Integrated Services Router Ports and LEDs User DocumentationBack Panel Ports and LEDs Connector/Slot DescriptionLED Label Color Description PWR Front Panel LEDs Safety Information Install the Router Statement 1071-Warning Definition Warnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla SicurezzaAviso Instruções Importantes DE Segurança Page GEM Disse Anvisninger Page Connect to the Router This section describes the procedures for cable connections From the router first. Statement Cable Connections Interface Numbering Slot/Connector Slot Type Interface Numbering Notation Power Up the Router Checklist for Power-UpPowering Up the Router Verifying the Hardware Configuration Perform Initial Configuration Would you like to enter basic management setup? yes/no yes Summary of the available interfaces appears Verifying the Initial Configuration Where to Go Next Product Documentation DVD Ordering Documentation Obtaining DocumentationDocumentation Feedback Cisco.com Reporting Security Problems in Cisco Products Cisco Product Security OverviewObtaining Technical Assistance Submitting a Service Request Definitions of Service Request SeverityCisco Technical Support & Documentation Website Obtaining Additional Publications and Information Page USA