Displaying and testing the dial plan
Cisco TelePresence ISDN Gateway 2.1 Online help (Printable format) 23 of 135
• N x 56kbps: the call is a video call using
N x 56kbps (for legacy ISDN endpoints
only)
Ports
The ISDN port(s) on which the call
may be placed.
Codecs
Shows the choice made when adding
the dial plan rule. One of Default, Custom or Safe. (See Adding and
updating dial plan rules for more details.)
UID
The unique identifier for the dial plan
rule. Each rule in the dial plan is assigned a unique ID
number generated by the ISDN Gateway. This
UID uniquely identifies the dial plan rule when it is
referenced in the audit log.
* (asterisk)
Identifies the rule you have just
moved. If you have just moved a rule in the list, it will be
marked with an asterisk (*). This is to help you
see the changes you have made.
Modifying the rules list To change the order of rules, drag and drop the rule that you want to move or use the up and down links.
To add a rule, click Add rule (see Adding and updating dial plan rules).
To remove a rule, select one (or more) and click Delete select ed rules.
Testing the dial plan It may take some experimentation to create the dial plan th at you require. The ISDN Gateway provides a
facility to test the dial plan to see how your set of rules acts on a particular number.
To test the dial plan:
1. Go to Dial plan.
2. If you want to test how the dial plan acts
o on a particular number or address for an ISDN to IP connection, ensure you are on the
ISDN to IP dial plan tab
o on a particular number for an IP to ISDN connection, ensure you are on the IP to ISDN
dial plan tab
3. In the Test dial plan section, enter the number to test and c lick Test number.
The ISDN Gateway displays the number that you have tested, the rule tha t the condition matched, the
outcome (that is, whether the call was rejected or the num ber that has been dialed in response) and the
bandwidth.