Cisco IE 3010 Switch Getting Started Guide
14
Cisco IE 3010 Switch Getting Started Guide
78-19582-02
Rack-Mounting the Switch
Use the four number-12 Phillips machine screws to attach the brackets to the rack.
Use the black Phillips machine screw to attach the cable guide to the left or right
bracket.
Warning
To prevent bodily injury when mounting or servicing this unit in a rack, you must
take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety:
This unit should be mounted at the bottom of the rack if it is the only unit in the
rack.
When mounting this unit in a partially filled rack, load the rack from the bottom
to the top with the heaviest component at the bottom of the rack.
If the rack is provided with stabilizing devices, install the stabilizers before
mounting or servicing the unit in the rack.
Statement 1006
Warning
For mounting railway-application equipment and for EN50155 standard
compliance, the switch must be installed only in a rack mid-mounting position.
If you install the switch in a front rack-mounting (cable side or power supply
side) position or in a wall-mounting position, a mechanical failure can occur
that results in the switch becoming detached from the rack.
Statement 403
1Mid-mounting position 3Cable-side mounting position
2Number-8 Phillips flat-head
screws
4Power-supply-side mounting
position