Cisco IE 3010 Switch Getting Started Guide

Resetting the Switch to the Default Settings

Caution Resetting the switch deletes the configuration and restarts the switch.

1.Press and hold the Express Setup button for about 10 seconds. The switch reboots. The system LED turns green after the switch completes rebooting.

2.Press the Express Setup button again for 3 seconds. A switch 10/100 Ethernet port blinks green.

3.Follow Steps 6 to 13 in the “Running Express Setup” section on page 4.

Accessing Help Online

First look for a solution in the troubleshooting section of the switch hardware installation guide or the switch software configuration guide on Cisco.com. You can also use the Cisco Technical Support and Documentation site for a list of known hardware problems and extensive troubleshooting documentation.

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.

 

 

Cisco IE 3010 Switch Getting Started Guide

 

 

 

 

 

 

78-19582-02

 

 

25

 

 

 

Page 25
Image 25
Cisco Systems IE301016S8PC manual Obtaining Documentation and Submitting a Service Request, Accessing Help Online