Cisco IE 3010 Switch Getting Started Guide
Step 8 Enter this information in the Network Settings fields:
Note All entries must be in English letters.
•In the Management Interface (VLAN ID) field, the default is 1.
Note
•In the IP Assignment Mode field, we recommend that you use the default, Static, which means that the switch always has the IP address that you assign. Use the DHCP setting when you want the switch to automatically obtain an IP address from a DHCP server.
•In the IP Address field, enter the IP address of the switch.
•In the Subnet Mask field, click the
•In the Default Gateway field, enter the IP address for the default gateway (router).
•Enter your password in the Switch Password field. The password can be from 1 to 25 alphanumeric characters, can start with a number, is case sensitive, allows embedded spaces, but does not allow spaces at the beginning or end. In the Confirm Switch Password field, enter your password again.
Note You must change the password from the default password, cisco.
Step 9 Enter the Optional Settings now, or enter them later:
You can enter other administrative settings in the Express Setup window. For example, the optional administrative settings identify and synchronize the switch for enhanced management. NTP synchronizes the switch clock with the network clock. You can also manually set the system clock settings.
Click Submit to save your changes.
For more information about the Express Setup fields, see the online help for the Express Setup window.
Step 10 After you click Submit, these events occur:
•The switch is configured and leaves Express Setup mode.
•The browser displays a warning message and tries to connect with the earlier switch IP address. Typically, connectivity between the PC and the switch is lost because the configured switch IP address is in a different subnet from the PC IP address.
Cisco IE 3010 Switch Getting Started Guide
8 |
|
|
|
