CHAPTER
1-1
Ericsson MD-110 Serial Integration Guide
OL-1290-01
1
Ericsson MD-110 Serial IntegrationIntegration Overview
Before performing the following integration steps, confirm that the CiscoUnity™
server is ready for the integration by completing the appropriate tasks in Chapters
1 through 3 of the Cisco Unity Installation Guide.
Integration Steps
Follow these steps to set up this integration.
1. Review the system and equipment requirements to confirm that all phone
system and CiscoUnity server requirements have been met. See the
“Requirements” section on page1-2.
2. Configure CiscoUnity for the integration. See the “Configuring Cisco Unity
for the Integration” section on page 1-5.
3. Program the phone system and extensions. See the “Programming the Phone
System” section on page1-7.
4. Test the integration. See the “Testing the Integration” section on page1-9.