Manuals / Cisco Systems / Communications / IP Phone

Cisco Systems MD-110 manual Starting the Cisco Unity Software, Click Shut Down

Models: MD-110

1 42

Download 42 pages 58.93 Kb

Page 38

Appendix A Exiting and Starting the Cisco Unity Software and Server

Shutting Down or Restarting the Cisco Unity Server

Step 3 In the Cisco Unity Status Monitor, under Shutting Down Unity, choose a method: Cisco Unity stops running after all calls are finished, or Cisco Unity interrupts calls in progress with a voice message, disconnects all calls, then stops running.

Step 4 Click Shut Down.

Shutting Down or Restarting the Cisco Unity Server

If an expansion chassis is connected to the Cisco Unity server, and if both the expansion chassis and the server are turned off, turn on the expansion chassis before you turn on the server. Otherwise, the server may not detect the voice cards in the expansion chassis.

To shut down or restart the Cisco Unity server

Step 1 Exit the Cisco Unity software, if it is running, by using a procedure in the “Exiting the Cisco Unity Software” section on page A-1.

Step 2 On the Windows Start menu, click Shut Down.

Step 3 Click Shut Down or Restart.

During a restart, the Cisco Unity software starts automatically.

When Cisco Unity starts successfully, three tones play and a check mark appears in the Cisco Unity icon in the status area of the taskbar.

When Cisco Unity does not start successfully, two tones play and an “X” appears in the Cisco Unity icon in the status area of the taskbar.

Starting the Cisco Unity Software

This section provides two procedures for starting the software: from the

Cisco Unity server and from another computer.

	Ericsson MD-110 Serial Integration Guide
A-2	OL-1290-01

Image 38

Cisco Systems MD-110 Starting the Cisco Unity Software, Click Shut Down, To shut down or restart the Cisco Unity server

Contents

Ericsson MD-110 Serial Integration Guide Ericsson MD-110 Serial Integration Guide Dual Phone System Integration Shutting Down or Restarting the Cisco Unity Server A-2 Purpose AudienceConvention Description OrganizationConventions Cisco Unity Documentation Document LocationObtaining Documentation World Wide WebDocumentation Feedback Documentation CD-ROMOrdering Documentation Cisco.com To access Cisco.com, go to the following websiteObtaining Technical Assistance Technical Assistance CenterContacting TAC by Using the Cisco TAC Website Xii Integration Overview Integration StepsCisco Unity Server RequirementsPhone System Integration Description Connections Between the Phone System and Cisco UnityIntegration Features Go to System Licensing Licensed Features Configuring Cisco Unity for the IntegrationTo confirm that the integration is enabled Switch Parameter Required SettingChange the final digit to 1, so the line reads To enter port settingsTo enable extensions beginning with zero Programming the Phone System To program the phone systemIs restarted Transfer type UsageTesting the Integration To set up the test configurationTo test an external call with release transfer NotificationMonitor Transfer To set up supervised transfer on Cisco UnityTo test an internal call with release transfer To test supervised transfer To return Example Subscriber to the default settingsSet the Rings to Wait For field to Click the Save icon Ericsson MD-110 Serial Integration Testing the Integration OL-1290-01 Integration Steps When No Phone Systems Are Installed Dual Phone System Integration OverviewEricsson MD-110 Serial Integration Guide Changing Cisco Unity Administrator Settings RequirementsTo specify switch settings for the traditional phone system To modify voice port settings To specify switch settings for Cisco CallManagerGo to System Switch IP Switch To reach someone on the traditional phone systemEricsson MD-110 Serial Integration Guide OL-1290-01 Changing the Number of Installed Ports Stop Unity To reinstall the AV-Cisco Tapi service providerTo remove the existing AV-Cisco TSP ProgramsRestart the Cisco Unity server Exiting the Cisco Unity Software To exit the Cisco Unity software from another computerTo shut down or restart the Cisco Unity server Starting the Cisco Unity SoftwareClick Shut Down Click Shut Down or RestartClick Start Cisco Unity To start the Cisco Unity software from another computerOL-1290-01 Phone System Integration To set the Port assignments in the Registry