A P P E N D I X B
Assigning Dialogic Ports for a Dual
Phone System Integration
In a dual phone system integration, Cisco Unity assigns a voice messaging port to the traditional phone system for every port available on the installed voice cards before assigning voice messaging ports to Cisco CallManager. The result is that Cisco Unity may not have enough voice messaging ports remaining to assign to Cisco CallManager.
The maximum number of voice messaging ports are assigned to the traditional phone system in spite of the settings on the Ports page in the System Administrator.
For example, a dual phone system integration might have the following configuration:
•A traditional phone system has a
•Cisco CallManager has six Voice Mail ports set up.
•The Cisco Unity server has a system key enabled for a total of eight ports.
•The Ports page on System Administrator indicates that Ports 1 and 2 are assigned to the traditional phone system and Ports 3 through 8 are assigned to Cisco CallManager.
Even so, Ports 1 through 4 (the total voice card ports) will be assigned to the traditional phone system, and Ports 5 through 6 will be assigned to Cisco CallManager.
If you want to assign fewer than the total voice card ports to the traditional phone system, you must first set the Port assignments on the Ports page of the System Administrator, then perform the following procedure.
|
| Ericsson |
|
|
|
|
| ||
|
|
|
| |
|
|
|
