![](/images/new-backgrounds/1140455/14045539x1.webp)
Chapter 1 Ericsson
Programming the Phone System
Step 3 | Use the GH command to create a hunt group for the voice messaging ports. | ||
| Make sure that the phone system sends calls only to Cisco Unity voice ports that | ||
| are set to Answer Calls on the System > Ports page in the Cisco Unity | ||
| Administrator. Calls sent to a voice port not set to Answer Calls cannot be | ||
| answered by Cisco Unity. And, if certain voice cards are installed, the call will not | ||
| be dropped, but the port remains unavailable for use until the Cisco Unity server | ||
| is restarted. |
| |
Step 4 | Use the VMPOI command to associate the hunt group with Cisco Unity. | ||
Step 5 | Use the KS command to provide message waiting indication on DTS phones. | ||
Step 6 | Program each phone to forward calls to the pilot number assigned to the voice | ||
| messaging ports, based on one of the following Cisco Unity call transfer types. | ||
| Table |
| |
|
|
| |
| Transfer type |
| Usage |
|
|
|
|
| Release transfer |
| Program the phone to forward calls to the pilot |
| (blind transfer) |
| number when: |
|
|
| • The extension is busy |
|
|
| • The call is not answered |
|
|
|
|
| Supervised transfer |
| Program the phone to forward calls to the pilot |
|
|
| number only when the call is not answered. |
|
|
| Confirm that call forwarding is disabled when the |
|
|
| extension is busy. |
|
|
|
|
|
|
|
|
| Ericsson |