Cisco Systems MDS 9200 Series manual Removing the Shelf Bracket Kit Optional

Appendix A Cabinet and Rack Installation

Cisco MDS 9000 Family telco and EIA Shelf Bracket

Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m

Removing the Shelf Bracket Kit (Optional)

The shelf bracket kit can be removed once the Cisco MDS 9200 Series has been installed in a two-post telco or four-post EIA rack, and the front rack-mount brackets are securely attached to the rack-mounting rails. For additional support in an EIA rack, ensure that the C brackets on the Cisco MDS 9200 Series are attached to the rear rack-mounting rails.

To remove the shelf bracket kit, follow these steps:

Step 1 Remove the screws fastening the slider brackets to the rear rack-mounting rails. Then, slide the slider brackets out of the shelf brackets.

Step 2 Remove the screws fastening the crossbar to the shelf brackets and remove the crossbar.

Step 3 Remove the screws fastening the shelf brackets to the front rack-mounting rails. Then, remove the shelf brackets from the rack.

Cisco MDS 9200 Series Hardware Installation Guide

OL-17468-02 A-9