18-14
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-06
Chapter 18 Configuring Flex Links and the MAC Address-Table Move Update Feature
Monitoring Flex Links and the MAC Address-Table Move Update
To disable the MAC address-table move update feature, use the no mac address-table move update
receive configuration command. To display the MAC address-table move update information, use the
show mac address-table move update privileged EXEC command.
This example shows how to configure a switch to get and process MAC address-table move update
messages:
Switch# configure terminal
Switch(conf)# mac address-table move update receive
Switch(conf)# end
Monitoring Flex Links and the MAC Address-Table Move Update
Table 18-1 shows the privileged EXEC command for monitoring Flex Link configuration.
Tab le 18-1 Flex Link Monitoring Command
Command Purpose
show interface [interface-id] switchport
backup Displays the Flex Link backup interface configured for an interface, or displays
all Flex Links configured on the switch and the state of each active and backup
interface (up or standby mode).
show mac address-table move update Displays the MAC address-table move update information on the switch.