3-16
Cisco ME 3400 Ethernet Access Switch Software Configuration Guide
OL-9639-06
Chapter 3 Assigning the Switch IP Address and Default Gateway
Modifying the Startup Configuration
port-type nni
!
interface GigabitEthernet0/2
port-type nni
!
interface Vlan1
no ip address
no ip route-cache
no ip mroute-cache
shutdown
!
interface Vlan10
ip address 192.168.1.76 255.255.255.0
!
ip default-gateway 192.168.1.3
no ip http server
ip classless
!
!
!
control-plane
!
!
line con 0
session-timeout 120
exec-timeout 120 0
speed 115200
line vty 0 4
password cisco
no login
line vty 5 15
no login
!
!
end
To store the configuration or changes you have made to your startup configuration in flash memory, enter
this privileged EXEC command:
Switch# copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
This command saves the configuration settings that you made. If you fail to do this, your configuration
will be lost the next time you reload the system. To display information stored in the NVRAM section
of flash memory, use the show startup-config or more startup-config privileged EXEC command.
For more information about alternative locations from which to copy the configuration file, see
Appendix B, “Working with the Cisco IOS File System, Configuration Files, and Software Images.
Modifying the Startup Configuration
These sections describe how to modify the switch startup configuration:
Default Boot Configuration, page 3-17
Automatically Downloading a Configuration File, page 3-17
Booting Manually, page 3-18
Booting a Specific Software Image, page 3-18