Cisco Systems N5KC5548UPFA, N55M4Q manual Supported Power Cords and Plugs, Length

Appendix C Cable and Port Specifications

Supported Power Cords and Plugs

Se n d d o c u m e n t a t i o n c o m m e n t s t o n ex u s 5 k d o c s @ c i s c o . c o m .

Table C-3lists the pinouts for the console port on the Cisco Nexus 5010 switch.

Table C-3	Console Port Pinouts for the Cisco Nexus 5010 Switch
Pin	Signal
1	RTS
2	DTR
3	TxD
4	GND
5	GND
6	RxD
7	DSR
8	CTS

Supported Power Cords and Plugs

Note This section applies to the Cisco Nexus 5548 switch, the Cisco Nexus 5020 switch, and the Cisco Nexus 5010 switch.

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for connection to a power distribution unit that has IEC 60320 C19 outlet receptacles. The standard power cords have an IEC C13 connector on the end that plugs into the switch. The optional jumper power cords, for use in cabinets, have an IEC C13 connector on the end that plugs into the switch and an IEC C14 connector on the end that plugs into an IEC C13 outlet receptacle.

Note Only the regular power cords or jumper power cords provided with the switch are supported.

Table C-4lists the power cords for the Cisco Nexus 5020 switch and provides their lengths in feet and meters.

	Table C-4	Power Cords for the Cisco Nexus 5020 Switch
			Length		Power Cord Reference
	Description		Feet	Meters	Illustration
	SFS-250V-10A-AR		8.2	2.5	Figure C-2
	Power cord 250 VAC 10 A, IRAM 2073 plug
	Argentina
	CAB-9K10A-AU		8.2	2.5	Figure C-3
	Power cord 250 VAC 10 A, 3112 plug,
	Australia
	SFS-250V-10A-CN		8.2	2.5	Figure C-4
	Power cord 250 VAC 10 A, GB 2009 plug
	China
		Cisco Nexus 5500 Platform and Cisco Nexus 5000 Platform Hardware Installation Guide
OL-15902-02						C-3