Chapter 5 Installing Memory in the Router
Installing and Formatting Compact Flash Memory Cards in Cisco 3631 Routers
Base | FAT Sector | 128 |
Base | Data Sector | 184 |
Please use "dir" command to display the contents of the card.
The following example shows output for an internal Compact Flash memory card formatted with a Class B Flash file system:
Router# show flash:
System CompactFlash directory:
File Length Name/status
15190020
26458584
316535740
[28184536 bytes used, 100266024 available, 128450560 total]
125440K bytes of ATA System CompactFlash (Read/Write)
Formatting Compact Flash Memory as a DOS File System
To format a Compact Flash memory card with a Class C Flash file system, use the format command.
To format a new internal Compact Flash memory card, or to remove the files from a previously installed internal Compact Flash memory card, enter the format flash: command.
The following example shows output for formatting an internal Compact Flash memory card formatted with a Class C Flash file system:
Router# format flash:
Format operation may take a while. Continue? [confirm]
Format operation will destroy all data in "flash:". Continue? [confirm] Enter volume ID (up to 64 chars)[default flash]:
Current Low End File System flash card in flash will be formatted into DOS File System flash card! Continue? [confirm]
Format:Drive communication & 1st Sector Write OK...
Writing Monlib sectors ...................................................................
Monlib write complete
..
Format:All system sectors written. OK...
Format:Total sectors in formatted partition:250592
Format:Total bytes in formatted partition:128303104
Format:Operation completed successfully.
Format of flash complete
Formatting Compact Flash Memory as a Class B Flash File System
|
|
| To format a Compact Flash memory card with a Class B Flash file system (LEFS), use the erase | |
|
|
| command. | |
|
|
| To format a new internal Compact Flash memory card, or to remove the files from a previously installed | |
|
|
| internal Compact Flash memory card, enter the erase flash: command. | |
|
|
| The following example shows output for formatting an internal Compact Flash memory card with a | |
|
|
| Class B Flash file system: | |
|
|
| Router# erase flash: | |
|
|
| Erasing the flash filesystem will remove all files! Continue? [confirm] | |
|
|
| Current DOS File System flash card in flash: will be formatted into Low | |
|
|
| End File System flash card! Continue? [confirm] | |
|
|
| Erasing device... | |
|
|
| Cisco 3600 Series Hardware Installation Guide | |
|
|
| ||
|
|
| ||
|
|
| ||
