Cisco Systems PA-FE-TX, PA-FE-FX manual Installation Overview, Enabled, Link

Installation Overview

The PA-FE-TX and PA-FE-FX can be installed in either port adapter slot 0 or port adapter slot 1 on the VIP2. Figure 3-1 shows a PA-FE-TX installed in port adapter slot 0 on a VIP2-15 or VIP2-40. Figure 3-2 shows a PA-FE-FX installed in port adapter slot 0 on a VIP2-15 or VIP2-40.

Figure 3-1 VIP2-15 or VIP2-40 with a PA-FE-TX in Port Adapter Slot 0

Bus connector CPU Boot ROM

		U6
SRAM		U2	DRAM
	U4		SIMMs

DIMM U5

PA-FE-TX in port adapter slot 0

FAST ETHERNET

0

Port adapter blank in port adapter slot 1

H6449

Port adapter handles not shown

ENABLED MII LINK RJ45

Note The PA-FE-FX has the MII connector like the PA-FE-TX, but has an SC-type fiber-optic connector in place of the RJ-45 connector.

3-2PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration