Cisco Systems PA-FE-TX, PA-FE-FX manual Organization, Related Documentation

Organization

Organization

This document is organized into the following chapters:

Section	Title	Description
Chapter 1	Overview	Provides information about the PA-FE-TX and
		PA-FE-FX 100BaseT port adapters, illustrates
		their location in the supported hardware
		platforms, and describes their LED displays,
		cables, and receptacles
Chapter 2	Preparing for Installation	Provides information about safety considerations,
		tools required, and procedures you should
		perform before the actual installation
Chapter 3	VIP2 and the PA-FE Port Adapters	Provides instructions for installing the PA-FE port
		adapters on a VIP2 interface processor installed in
		a Cisco 7500 or Cisco 7000 series router
Chapter 4	Cisco 7200 Series and the PA-FE	Provides instructions for installing the PA-FE port
	Port Adapters	adapters in a Cisco 7200 series router
Chapter 5	Cisco uBR7200 Series and the	Provides instructions for installing the PA-FE port
	PA-FE Port Adapters	adapters in a Cisco uBR7200 series universal
		broadband router
Chapter 6	Cisco 7100 Series and the PA-FE-TX	Provides instructions for installing the PA-FE port
	and PA-FE-FX	adapters in the Cisco 7100 series routers
Chapter 7	Installing PA-FE Port Adapter	Provides instructions for installing PA-FE port
	Interface Cables	adapter cables on supported platforms
Chapter 8	Configuring PA-FE Port Adapter	Provides instructions for configuring PA-FE port
	Interfaces	adapter interfaces on supported platforms

Related Documentation

Your router and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources:

•For Cisco IOS software configuration information and support, refer to the modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco hardware.

Note You can access Cisco IOS software configuration and hardware installation and maintenance documentation on the World Wide Web at http://www.cisco.com, http://www-china.cisco.com, or http://www-europe.cisco.com.

•For hardware installation and maintenance information on Cisco 7000 series and Cisco 7500 series routers, and the VIP2, refer to the following publications:

—The installation and configuration guide that shipped with your Cisco 7000 series or Cisco 7500 series router

—Second-Generation Versatile Interface Processor (VIP2) Installation and Configuration (for VIP2 users only)

viPA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration