Cisco Systems PA-FE-FX, PA-FE-TX manual Preface, Objectives

Preface

This preface explains the objectives and organization of this document and how to find additional information on related products and services. This preface contains the following sections:

•

•

•

•

•

Objectives, page v

Organization, page vi

Related Documentation, page vi

Cisco Connection Online, page viii

Cisco Documentation CD-ROM, page viii

Objectives

This document describes how to install and configure the 100BaseTX and 100BaseFX port adapters (PA-FE-TX[=] and PA-FE-FX[=]) in the following platforms:

•Cisco 7200 series routers—which consist of the two-slot Cisco 7202, the four-slot Cisco 7204 and Cisco 7204VXR, and the six-slot Cisco 7206 and Cisco 7206VXR

•Cisco uBR7200 series universal broadband routers—which consist of the six-slot (four cable modem card slots and two port adapter slots) Cisco uBR7246 and the three-slot (two cable modem card slots and one port adapter slot) Cisco uBR7223

•Cisco 7100 series routers—which consist of the Cisco 7120 series and Cisco 7140 series

•Second-generation Versatile Interface Processor (VIP2) in all Cisco 7500 series routers and in Cisco 7000 series routers using the 7000 Series Route Switch Processor (RSP7000) and 7000 Series Chassis Interface (RSP7000CI) installed

Note The Cisco 7206VXR and the Cisco 7206 can be used as router shelves in a Cisco AS5800 Universal Access Server. For information about the Cisco 7206VXR and the Cisco 7206 as router shelves, refer to the Cisco AS5800 Universal Access Server documentation listed in the “Related Documentation” section on page vi.

Preface v