Cisco Systems PA-FE-TX, PA-FE-FX manual Removing a Port Adapter, H11503, H11504

Removing a Port Adapter

Figure 5-1 Cisco uBR7200 Series with a PA-FE-TX in Slot 2—Cisco uBR7246

PA-FE-TX port

adapter

H11503

Figure 5-2 shows a PA-FE-FX installed in slot 2 of a Cisco uBR7200 series router.

Figure 5-2 Cisco uBR7200 Series with an PA-FE-FX in Slot 2—Cisco uBR7246

PA-FE-FX port adapter

H11504

Removing a Port Adapter

Use the following procedure to remove a port adapter from a Cisco uBR7200 series universal broadband router:

Step 1 Attach an ESD-preventive wrist strap between you and an unfinished chassis surface.

Warning During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the backplane with your hand or any metal tool, or you could shock yourself.

Step 2 Unlock the retaining mechanism of the port adapter:

—For a Cisco uBR7246, slide the port adapter retention clip for the desired port adapter slot down in the unlocked position. The retention clip remains in the unlocked position.

(See Figure 5-3.)

5-2PA-FE-TX and PA-FE-FX Fast Ethernet 100BaseT Port Adapter Installation and Configuration