Tip

RE1000 Range Extender

4.Select the network to use, then click Next.

5.Type your network’s password, then click OK. - OR -

If your network is hiddden (your router does not broadcast its name), click My network is hidden, enter your network’s information, then click OK.

Getting Started

6.Click Next. Your extender is set up, and you are prompted to move the extender to its final location.

For best performance, position the extender where the wireless signal of your router or access point is reliably strong (at least 60% strength).

Image 4

Contents

Getting Started Introduction Contents Overview Top How to install the range extenderBottom TIP How to change the power plug configuration To attach the AC power plug How to open the browser-based utility If the extender has not been set up yetIf the extender has already been set up Using a wired computer Using Wi-Fi Protected Setup How to use the browser-based utilityConnecting the extender to an existing access point Wi-Fi Protected Setup light activity Connecting with the Wi-Fi Protected Setup Button Connecting devices to your network through the extenderConnecting with the range extender’s PIN Connecting with the client device’s PIN Connecting with the extender’s PIN How to use Site Survey To open the Site Survey Troubleshooting You cannot access your range extenderTo fix the problem on Windows computers You cannot get your extender connected To fix the problem on Mac computers You have intermittent connection problems Specifications Environmental 3425-01532

Cisco Systems RE1000 manual Tip