RE1000 Range Extender
How to open the browser-based utility
After setting up the extender with the setup software (located on the CD), the extender will be ready for use. If you would like to change its advanced settings, use the extender’s
If the extender has not been set up yet
Using a wired computer:
1.Use the included Ethernet (network) cable to connect your extender to your computer.
2.Open a web browser. If you have defined a default startup page in your browser, the extender’s User Name and Password dialog box automatically opens. If your browser’s home or default page is blank, enter any valid web adddress and the extender’s User Name and Password dialog box opens.
3.Leave the User Name blank, then enter the default password admin.
4.Click OK. You are logged in to your extender’s
Getting Started
Using a wireless computer:
1.Locate the extender’s SSID. The extender comes with a
2.Click Associate. Verify that your computer has successfully associated with the extender (see your computer’s operating system help for instructions on confirming the network association).
3.Open a web browser. If you have defined a default startup page in your browser, the extender’s User Name and Password dialog box automatically opens. If your browser’s home or default page is blank, enter any valid web adddress and the extender’s User Name and Password dialog box opens.
4.Leave the User Name blank, then enter the default password admin.
5.Click OK. You are logged into your extender’s
If the extender has already been set up
On a Microsoft Windows XP computer:
1.Click Start, My Computer, then click My Network Places. The RE1000 icon appears in the right panel. (You might be required to change the firewall settings to allow the display of networked computers. Refer to your operating system’s help for instructions.)
2.Right-click the RE1000 icon, then click Properties.
3.Read the extender’s IP adddress, or
6
