Administration
Traceroute
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 75
5
•TTL—Enter the maximum number of hops that Traceroute permits. This is
used to prevent a case where the sent frame gets into an endless loop. The
Traceroute command terminates when the destination is reached or when
this value is reached. To use the default value (30), select Use Default.
•Timeout—Enter the length of time that the system waits for a frame to return
before declaring it lost, or select Use Default.
STEP 3 Click Activate Traceroute. The operation is performed.
A page appears showing the Round Trip Time (RTT) and status for each trip in the
fields:
•Index—Displays the number of the hop.
•Host—Displays a stop along the route to the destination.
•Round Trip Time (1-3)—Displays the round trip time in (ms) for the first
through third frame and the status of the first through third operation.