VLAN Management
Configuring VLAN Interface Settings
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 201
13
The page enables the creation of either a single VLAN or a range of VLANs.
STEP 3 To create a single VLAN, select the VLAN radio button, enter the VLAN ID (VID),
and optionally the VLAN Name.
To create a range of VLANs, select the Range radio button, and specify the range
of VLANs to be created by entering the Starting VID and Ending VID, inclusive.
When using the Range function, the maximum number of VLANs you can create at
one time is 100.
STEP 4 Click Apply to create the VL AN(s).
Configuring VLAN Interface Settings
The Interface Settings page
displays and enables configuration of VLAN-related
parameters for all interfaces
To configure the VLAN settings:
STEP 1 Click VLAN Management > Interface Settings.
STEP 2 Select an interface type (Port or LAG), and click Go. Ports or LAGs and their VLAN
parameters are displayed.
STEP 3 To configure a Port or LAG, select it and click Edit.
STEP 4 Enter the values for the following fields:
Interface—Select a Port/LAG.
Interface VLAN Mode—Select the interface mode for the VLAN. The
options are:
-General—The interface can support all functions as defined in the
IEEE 802.1q specification. The interface can be a tagged or untagged
member of one or more VLANs.
-Access—The interface is an untagged member of a single VLAN. A port
configured in this mode is known as an access port.
-Trun k—The interface is an untagged member of one VLAN at most, and
is a tagged member of zero or more VLANs. A port configured in this
mode is known as a trunk port.