Security
Configuring TCP/UDP Services
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 355
18
•Tel n e t —Disabled by factory default
•SSH—Disabled by factory default
The active TCP connections are also displayed in this window.
To configure TCP/UDP services:
STEP 1 Click Security > TCP/UDP Service s.
STEP 2 Enable or disable the following TCP/UDP services on the displayed services.
•HTTP Service—Indicates whether the HTTP service is enabled or disabled.
•HTTPS Service—Indicates whether the HTTPS service is enabled or
disabled.
•SNMP Service—Indicates whether the SNMP service is enabled or
disabled.
•Tel n e t S e r v i c e—Indicates whether the Telnet service is enabled or disabled.
•SSH Service—Indicates whether the SSH server service is enabled or
disabled.
The TCP Service Table displays the following fields for each service:
•Service Name—Access method through which the device is offering the
TCP ser vice.
•Type—IP protocol the service uses.
•Local IP Address—Local IP address through which the device is offering
the service.
•Local Port—Local TCP port through which the device is offering the service.
•Remote IP Address—IP a ddre ss o f the remo te de vic e tha t is r eque sti ng th e
service.
•Remote Port—TCP port of the remote device that is requesting the service.
•State—Status of the service.
The UDP Services table displays the following information:
•Service Name—Access method through which the device is offering the
UDP service.
•Type—IP protocol the service uses.