Security: IPV6 First Hop Security
Before You Start
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 425
20
Before You Start
No preliminary tasks are required.
Configuring First Hop Security through Web GUI

FHS Common Settings

Use the FHS Settings page to enable the FHS Common feature on a specified
group of VLANs and to set the global configuration value for logging packet
dropping. If required, a policy can be added or the packet drop logging can be
added to the system-defined default policy.
To configure First Hop Security Common on ports or LAGs:
STEP 1 Click Security > First Hop Security > FHS Settings.
STEP 2 Enter the following global configuration fields:
•FHS VLAN List—Enter one or more VLANs on which First Hop Security is
enabled.
•Packet Dropped Logging—Select to create a SYSLOG when a packet is
dropped by a First Hop Security feature. This is the global default value if no
policy is defined.
STEP 3 Create a FHS policy if required by clicking Add.
Enter the following fields:
•Policy Name—Enter a user-defined policy name.
•Packet Drop Logging—Select to create a SYSLOG when a packet is
dropped as a result of a First Hop Security feature within this policy.
-Inherit—Use the value from the VLAN or the global configuration.
-Enable—Create a SYSLOG when a packet is dropped as a result of First
Hop Security.
-Disable—Do not create a SYSLOG when a packet is dropped as a result
of First Hop Security.