17
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 268
IP Configuration
IP interface addresses can be configured manually by the user, or automatically
configured by a DHCP server. This section provides information for defining the
device IP addresses, either manually or by making the device a DHCP client.
This section covers the following topics:
•Overview
•IPv4 Management and Interfaces
•DHCP Server
•IPv6 Management and Interfaces
•Domain Name
Overview
NOTE SG500X devices always work in Advanced L3 mode, unless they are in Hybrid
mode (see Stack Unit Mode) when they act like Sx500 devices. The Sx500
devices, on the other hand, must always be set to work in Layer 2 or Layer 3 system
mode. Therefore, when this section refers to a device that works in Layer 3 system
mode, thi s refe rs to all S G50 0X de vice s in Nati ve st ack ing m ode and t hos e dev ice s
that have been manually set to Layer 3 system mode. When this document refers to
a device that works in Layer 2 system mode, this refers to all Sx500 devices and
SG500X devices (in Hybrid mode) that have been manually set to Layer 2 mode.
Some features are only avai lable in Layer 2 or Layer 3 sy stem mode, as descr ibed
below:
•In Layer 2 system mode (only Sx500 devices), the device operates as a
Layer 2 VLAN-aware device, and has no routing capabilities.
•In Layer 3 system mode, the device has IP routing capabilities as well as
Layer 2 system mode capabilities. In this system mode, a Layer 3 port still