Cisco Systems SG50028PK9NA MED Details

Administration: Discovery
Configuring LLDP
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 111
8
•Remote Rx—Indicates the time (in micro seconds) that the receiving link
partner requests that the transmitting link partner waits before transmission
of data following Low Power Idle (LPI mode).
•Local Tx Echo—Indicates the local link partner’s reflection of the remote link
partner’s Tx value.
•Local Rx Echo—Indicates the local link partner’s reflection of the remote link
partner’s Rx value.
MED Details
•Capabilities Supported—MED capabilities enabled on the port.
•Current Capabilities—MED TLVs advertised by the port.
•Device Class—LLDP-MED endpoint device class. The possible device
classes are:
-Endpoint Clas s 1—Indicates a generic endpoint class, offering basic
LLDP services.
-Endpoint Clas s 2—Indicates a media endpoint class, offering media
streaming capabilities as well as all Class 1 features.
-Endpoint Clas s 3—Indicates a communications device class, offering all
Class 1 and Class 2 features plus location, 911, Layer2 switch support
and device information management capabilities.
•PoE Device Type—Port PoE type, for example, powered.
•PoE Power Source—Port’s power source.
•PoE Power Priority—Port’s power priority.
•PoE Power Value—Port’s power value.
•Hardware Revision –Hardware version.
•Firmware Revisi on—Firmware version.
•Software Revision—Software version.
•Serial Number—Device serial number.
•Manufacturer Name—Device manufacturer name.
•Model Name—Device model name.
•Asset ID—Asset ID.