Administration
System Settings
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version) 61
5
•System Uptime—Time that has elapsed since the last reboot.
•Current Time—Current system time.
•Base MAC Address—Device MAC address. If the system is in stack mode,
the base MAC address of the master unit is displayed.
•Jumbo Frames—Jumbo frame support status. This support can be
enabled or disabled by using the Port Settings page of the Port
Management menu.
NOTE Jumbo frames support takes effect only after it is enabled, and after
the device is rebooted.
Software Information:
•Firmware Version (Active Image)—Firmware version number of the active
image.
NOTE If the system is in stack mode (Native Stacking mode), the Firmware
Version number shown is based on the version of the master. See the Stack
Unit Mode section for more information about stack modes.
•Firmware MD5 Checksum (Active Image)—MD5 checksum of the active
image.
•Firmware Version (Non-active Image)—Firmware version number of the
non-active image. If the system is in stack mode, the version of the master
unit is displayed.
•Firmware MD5 Checksum (Non-active Image)—MD5 checksum of the
non-active image.
•Boot Version—Boot version number.
•Boot MD5 Checksum—MD5 checksum of the boot version.
•Locale—Locale of the first language. (This is always English.)
•Language Version—Language package version of the first or English
language.
•Language MD5 Checksum—MD5 checksum of the language file.
TCP/UDP Services Status:
•HTTP Service—Displays whether HTTP is enabled/disabled.
•HTTPS Service—Displays whether HTTPS is enabled/disabled.