Cisco Systems SPA92X Changing Your Ring Tone, Creating Your Own Ring Tones, Select Ring Tone

Using Advanced Phone Features	4
Using Ring Tones

Changing Your Ring Tone

To change a ring tone:

STEP 1 Press the Setup button.

STEP 2 Select Ring Tone.

STEP 3 Choose the extension for which to choose a ring tone and press Change.

STEP 4 Scroll through the ring tones and press Play to play the highlighted ring tone. Press Select to choose the highlighted ringtone for that extension.

Creating Your Own Ring Tones

You can create your own ring tones using the Ring Tone Utility that can be downloaded from http://www.cisco.com/go/smallbiz.

You will also need a source file from which to create your ring tone. You must have a .wav file less than 8 seconds in length saved to your computer. You can also use a sound editor to create the file with the following restrictions:

•

•

•

16-bit PCM mono

8000 samples per second

less than 6000 ms in length

To create a ring tone and upload it to a phone:

STEP 1 Open the Ring Tone Utility.

STEP 2 Enter the IP address of the phone.

STEP 3 Click Browse and navigate to the directory on your computer where the source

.wav file is stored. Select the .wav file and click Open.

STEP 4 Click Load Source File.

STEP 5 Enter a name for the ring tone. This name will appear in the display on the phone. You choose the file name later.

STEP 6 Enter the target. You can have up to two customized ring tones uploaded to the phone.

Cisco Small Business IP Phone SPA9XX User Guide 66