ERROR MESSAGE 12

Error message list

Message

Condition

 

 

BRG INPUT FAIL*1

• The Azimuth signal is interrupted. An alarm tone is emitted within

 

5 sec. and the display reverts to H UP mode in approx. 1 min.

 

 

TRIG SIGNAL FAIL*1

• If the TRIGGER signal is interrupted for more than 15 sec., an alarm

 

tone is emitted.

 

 

SHM SIGNAL FAIL*2

• If the SHM signal is interrupted for more than 15 sec., an alarm tone is

 

emitted.

 

 

POSN INPUT FAIL*1

• If the position signal is interrupted for more than 15 sec., an alarm tone

 

is emitted.

 

 

CHECK SCANNER CONNECTION*4

• The system cable may not be connected properly.

 

 

*1 Push any key to cancel the error message and beep tone. Turn the power OFF, then check the external data cable connection.

*2 An electricity failure may occur, turn the power OFF, then consult your dealer or service man. *3 Push any key to cancel the error message and beep tone.

*4 Turn the power OFF, then check the system cable connections.

35

Page 39
Image 39
Icom MR-1000TTM, MR-1000RTM, EX-2714 instruction manual Error Message, Error message list, Message Condition