Icom MR-1000TTM #9CURSOR Indicator, $3HEADING Indicator, $6CROSS Line Cursor, 1NORTH Mark

#5COMPASS INDICATOR (pgs. 24, 39)

• GYRO	: NMEA (gyro) is connected.
• COMPASS	: NMEA (compass), N+1 or AUX data is
	connected.

#6EBL1/ 2 READOUTS (pgs. 15–16)

Shows the bearing of the displayed Electronic Bear- ing Lines (EBL1 and EBL2) when the EBL is in use.

•EBL2 shows PI (!0) readout.

#7WAYPOINT/MOB READOUTS (p. 13)

➥Shows the bearing and distance to the waypoint received from navigation equipment.

•This readout appears when the “WPT” of the FUNC- TION menu is turned ON.

•To display the waypoint/MOB marker, bearing data and NMEA data with 0183 format is necessary. (p. 39)

➥Shows the bearing and distance to the MOB (Man Over Board) event marker.

•Push [MOB]/[ ] to cancel the readout and the symbol.

#8POSITION/CURSOR READOUT (p. 13)

Shows your own ship or cursor latitude and longi- tude readout when external NMEA data with 0183 format is connected.

•Select ‘SHIP’ or ‘CURS’ in the “POSN DISP” of the FUNCTION menu.

•To display the POSITION; NMEA 0183 is necessary.

•To display the CURSOR; NMEA 0183 and bearing data are necessary.

#9CURSOR INDICATOR

Shows the bearing and distance to the cursor.

$0VECTOR INDICATOR (p. 18)

Shows the ATA and OWN vector type.

•T: True vector

•R: Relative vector

$1VECTOR TIME INDICATOR (p. 18)

Shows the vector interval time. Select vector time in the “TRAIL TIME” of the VIDEO menu.

•30 min. is applied, when ‘∞’ is selected for the vector time.

$2TRAILS INDICATOR (p. 12)

Shows the trail time.

•Echo remains with gradation during the trail time period on the screen. (Except for the trail time; ∞)

•Progressing time counter starts to count the time until the timer reaches the trail time.

$3HEADING INDICATOR

Shows the heading bearing readout.

•The HDG readout indicates the bow of the ship’s bearing in a clockwise direction from north.

PANEL DESCRIPTION 2

$4IR INDICATOR (p. 11)

Eliminates or reduces interference caused by other radar operating nearby.

•This function is available when the “IR” in the VIDEO menu is set to 1 or 2.

$5ECHO STRETCH INDICATOR (p. 6)

Appears when the echo stretch function is in use.

•This function is available when the “STRETCH” of the VIDEO menu is turned ON.

$6CROSS LINE CURSOR

Used for measuring the bearing and distance, set- ting the alarm zone, selecting the ATA targets, etc.

•Push [Ù Ú Ω ≈] several times to move the cursor.

$7EBL2 (pgs. 15–16)

Used for bearing measurement. When a target is selected, the EBL readout (#6) shows the bearing.

$8OWN SHIP VECTOR INDICATOR

Shows the vector of your own ship.

$9VRM 1 (pgs. 15–16) %0VRM 2 (pgs. 15–16)

Used for distance measurement. When a target is selected, the VRM1/2 readout (%3) shows the dis- tance.

%1NORTH MARK

The north mark shows the true north direction.

%2EBL1 (pgs. 15–16)

Used for bearing measurement. When a target is selected, the EBL readout (#6) shows the bearing.

%3VRM1/2 READOUTS (pgs. 15–16)

Shows the distance of the displayed Variable Range Markers (VRM1 and VRM2) when the VRM is in use.

•Nautical miles (NM) and kilometers (KM) can be se- lected in the FUNCTION menu as the distance unit.

%4ALARM INDICATOR (p. 17)

Appears when the alarm function is in use.

%5ZOOM INDICATOR (p. 11)

Appears when the zoom function is in use.

•Push [TARGET]/[ ] and [TRAILS]/[ ] simul- taneously to turn the function ON or OFF.

%6TIME INDICATOR %7TIME INDICATOR

Shows the estimated time to the marker edge from center of the marker with current speed.

%8TIME INDICATOR

Shows the estimated time to the waypoint with cur- rent speed.

5