Administration: Discovery
Configuring LLDP
109 Cisco Small Business 300 Series Managed Switch Administration Guide
8
Basic Details•Chassis ID Subtype—Type of chassis ID (for example, MAC address).
•Chassis ID—Identifier of the 802 LAN neighboring device chassis.
•Port ID Subtype—Type of the port identifier that is shown.
•Port ID—Identifier of port.
•Port Description—Information about the port, including manufacturer,
product name and hardware/software version.
•System Name—Name of system that is published.
•System Description—Description of the network entity (in alpha-numeric
format). This includes the system name and versions of the hardware,
operating system, and networking software supported by the device. The
value equals the sysDescr object.
•Supported System Capabilities—Primary functions of the device. The
capabilities are indicated by two octets. Bits 0 through 7 indicate Other,
Repeater, Bridge, WLAN AP, Router, Telephone, DOCSIS cable device, and
station, res pectively. Bit s 8 through 15 a re reserved .
•Enabled System Capabilities—Primary enabled function(s) of the device.
Management Address Table•Address Subtype—Managed address subtype; for example, MAC or IPv4.
•Address—Managed address.
•Interface Subtype—Port subtype.
•Interface Number—Port number.
MAC/PHY Details•Auto-Negotiation Supported—Port speed auto-negotiation support status.
The possible values are True and False.
•Auto-Negotiation Enabled—Port speed auto-negotiation active status. The
possible values are True and False.
•Auto-Negotiation Advertised Capabilities—Port speed auto-negotiation
capabilities, for example, 1000BASE-T half duplex mode, 100BASE-TX full
duplex mode.