Cisco Systems 802.3 Power via MDI, 802.3 Details, 802.3 Link Aggregation, 802.3 Energy Efficient Ethernet (EEE)

Administration: Discovery
Configuring LLDP
Cisco Small Business 300 Series Managed Switch Administration Guide 110
8
•Operational MAU Type—Medium Attachment Unit (MAU) type. The MAU
performs physical layer functions, including digital data conversion from the
Ethernet interfaces’ collision detection and bit injection into the network; for
example, 100BASE-TX full duplex mode.
802.3 Power via MDI
•MDI Power Support Port Class—Advertised power support por t class.
•PSE MDI Power Support—Indicates if MDI power is supported on the port.
•PSE MDI Power State—Indicates if MDI power is enabled on the port.
•PSE Power Pair Control Ability—Indicates if power pair control is
supported on the port.
•PSE Power Pair—Power pair control type supported on the port.
•PSE Power Class—Advertised power class of the port.
802.3 Details
•802.3 Maximum Frame Size—Advertised maximum frame size that is
supported on the port.
802.3 Link Aggregation
•Aggregation Capability—Indicates if the port can be aggregated.
•Aggregation S tatus—Indicates if the port is currently aggregated.
•Aggregation Port ID—Advertised aggregated port ID.
802.3 Energy Efficient Ethernet (EEE)
•Remote Tx—Indicates the time (in micro seconds) that the transmitting link
partner waits before it starts transmitting data after leaving Low Power Idle
(LPI mode).
•Remote Rx—Indicates the time (in micro seconds) that the receiving link
partner requests that the transmitting link partner waits before transmission
of data following Low Power Idle (LPI mode).
•Local Tx Echo—Indicates the local link partner’s reflection of the remote link
partner’s Tx value.
•Local Rx Echo—Indicates the local link partner’s reflection of the remote link
partner’s Rx value.