IP Configuration
IPv4 Management and Interfaces
259 Cisco Small Business 300 Series Managed Switch Administration Guide
16
•IP Address—Configured IP address for the interface.
•Mask—Configured IP address mask.
•Status—Results of the IP address duplication check.
-Ten ta t i v e —There is no final result for the IP address duplication check.
-Valid—The IP address collision check was completed, and no IP address
collision was detected.
-Valid-Duplicated—The IP address duplication check was completed,
and a duplicate IP address was detected.
-Duplicated—A duplicated IP address was detected for the default IP
address.
-Delayed—The assignment of the IP address is delayed for 60 second if
DHCP Client is enabled on startup in order to give time to discover DHCP
address.
-Not Received —Relevant for DHCP Address. When a DCHP Client starts
a discovery process, it assigns a dummy IP address 0.0.0.0 before the
real address is obtained. This dummy address has the status of “Not
Received”.
STEP 2 Click Add.
STEP 3 Select one of the following fields:
•Interface—Select Port, LAG, or VLAN as the interface associated with this
IP configuration, and select an interface from the list.
•IP Address Type—Select one of the following options:
-
Dynamic IP Address—Receive the IP address from a DHCP server.
-
Static IP Address—Enter the IP address.
STEP 4 If Static Address was selected, enter the IP Address for this interface.
STEP 5 If Static Address was selected, enter one of the following:
•Network Mask—IP mask for this address.
•Prefix Length—Length of the IPv4 prefix.
STEP 6 Click Apply. The IPv4 address settings are written to the Running Configuration
file.