Security
Defining Users
303 Cisco Small Business 300 Series Managed Switch Administration Guide
17
•Configuring RADIUS
•Configuring Port Security
•Configuring 802.1X
•Defining Time Ranges
Protection from other network users is described in the following sections. These
are attacks that pass through, but are not directed at, the device.
•Denial of Service Prevention
•SSL Server
•Defining Storm Control
•Configuring Port Security
•IP Source Guard
•Dynamic ARP Inspection
•Access Control
Defining Users
The default username/password is cisco/cisco. The first time that you log in with
the default username and password, you are required to enter a new password.
Passwor d compl exity is enab led by defaul t. If t he pas sword t hat you choos e is no t
complex enough (Password Complexity Settings are enabled in the Password
Strength page), you are prompted to create another password.

Setting User Accounts

The User Accounts page
enables entering additional users that are permitted to
access to the device (read-only or read-write) or changing the passwords of
existing users.
After adding a level 15 user (as described below), the default user is removed
from the system.
NOTE It is not permitted to delete all users. If all users are selected, the Delete button is
disabled.
To add a new user: